This article is reposted from RTK4U (AUTOSTEER)

To configure the ByNav receiver, it is best to use the ByNav software BY-CONNECT. (https://www.bynav.com/en/resource/support?cat=7)

Explanation of Commands for AgOpenGps C2-M20 (Uses COM3)

Special Commands when using T1-FD as separate receiver

C1-FD am PCB von www.autosteer.cc
when using bynav C1/C2/M2 module on www.autosteer.cc pcb use com1 for output:

You can get related C2/M20 product by direct purchase in the online shop

Shipment from Austria